Dell T105 Systems Memory has been If memory has been, Added or removed, this, Memory module may

Table 1-6. System Messages (continued)

Message	Causes	Corrective Actions
The amount of system	Memory has been	If memory has been
memory has changed	added or removed, or a	added or removed, this
	memory module may	message is informative
	be faulty.	and can be ignored. If
		memory has not been
		added or removed, check
		the SEL to determine if
		single-bit or multi-bit
		errors were detected and
		replace the faulty
		memory module. See
		"Troubleshooting
		System Memory" on
		page 114.

The file being copied is too large for the destination drive.

The file that you are trying to copy is too large to fit on the disk.

Try increasing disk space on the destination drive by deleting unnecessary files.

Time-of-day not set — please run SETUP program

The time or date stored in the System Setup program does not match the system clock.

Enter the System Setup program and correct the Date and Time options. See "Using the System Setup Program" on page 31. If the problem persists, see "Troubleshooting the System Battery" on page 111.

Timer chip counter 2	A chip on the system	Run the system
failed	board might be	diagnostics. See
	malfunctioning.	"Running the System
		Diagnostics" on
		page 127.

28

About Your System