Dell T105 Systems owner manual Optical drive Drive bay screw slots

Figure 3-10. Removing and Installing an Optical or Tape Drive (SATA Connection)

2

3

1

4

1	sliding plate	2	optical drive shoulder screw
3	optical drive	4	drive bay screw slots

7If you are installing another drive in the bay, see "Installing an Optical or Tape Drive" on page 60.

8If the drive is being permanently removed, install an insert on front drive bezel. See "Replacing an Insert on the Front Drive Bezel" on page 50.

9Replace the front drive bezel. See "Replacing the Front Drive Bezel" on page 49.

10Close the system. See "Closing the System" on page 47.

11Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.

Installing System Components

59