Dell T105 Systems owner manual Bezel Service Only Parts Procedure, Removing the Bezel

4Close the system. See "Closing the System" on page 47.

5Reconnect the system to the electrical outlet, and turn on the system.

Bezel (Service Only Parts Procedure)

Removing the Bezel

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge.

1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 47.

3Remove the heat sink and shroud assembly. See "Removing the Processor" on page 79. Do not remove the processor, however.

4Remove the large processor cooling fan. See "Removing the Cooling Fans" on page 84.

5Remove the two bezel release screws. See Figure 3-29.

6Slide the bezel toward the top of the system, then lift it outward.

Installing System Components

95