Dell T105 Systems owner manual Replacing the Bezel, Bezel Alignment tab

Figure 3-29. Removing the Bezel

1

4

		3
			2
1	alignment slot	2	bezel release screws (2)
3	bezel	4	alignment tab

Replacing the Bezel

1Align the bezel with the chassis frame and slide it into position.

2Secure the alignment tabs into their alignment slots.

3Attach the two bezel release screws to secure the bezel to the system chassis. See Figure 3-29.

4Replace the processor fan. See "Replacing the Cooling Fans" on page 86.

5Reinstall the heat sink and shroud assembly. See "Replacing the Processor" on page 82.

6Close the system. See "Closing the System" on page 47.

7Reconnect the system to the electrical outlet, and turn on the system.

96

Installing System Components