Dell T105 Systems owner manual Installing a Diskette Drive

9Close the system. See "Closing the System" on page 47.

10Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.

Installing a Diskette Drive

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge.

1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 47.

3Unpack the replacement diskette drive, and prepare it for installation.

4Check the documentation for the drive to verify that it is configured for your system.

5Remove the front drive bezel. See "Removing the Front Drive Bezel" on page 49.

6Remove the 3.5-inch insert on the front drive bezel. See "Removing an Insert on the Front Drive Bezel" on page 50.

7Remove the four shoulder screws from the back of the insert. See Figure 3-4; the 3.5-inch insert holds four screws.

8Attach the four screws to the diskette drive as shown in Figure 3-7.

54

Installing System Components