Dell T105 Systems owner manual Removing an Insert on the Front Drive Bezel

Figure 3-3. Removing and Replacing the Front Drive Bezel

1

2

1 sliding plate 2 front drive bezel

Removing an Insert on the Front Drive Bezel

If you install a drive in the 3.5-inch or 5.25-inch drive bays, first remove the corresponding insert on the front drive bezel. Push the insert gently from the front of the bezel. Then from the back of the bezel, squeeze the tab upward on the end of the insert and rotate the insert away from the bezel. See Figure 3-4.

Replacing an Insert on the Front Drive Bezel

If you remove a drive in the 3.5-inch or 5.25-inch drive bays, replace the corresponding insert on the front drive bezel. From the back of the bezel, fit the tab on the end of the insert into the notch on the bezel and snap the other end of the insert into place. See Figure 3-4.

50

Installing System Components