Dell T105 Systems owner manual Replacing the I/O Panel Assembly, Holding tab on the chassis

Figure 3-30. Removing and Installing the I/O Panel Assembly

1

2

3

			4
		5
1	screw on the I/O panel	2	I/O panel assembly
3	alignment stop on chassis	4	I/O panel securing slot
5	holding tab on the chassis

Replacing the I/O Panel Assembly

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge.

1Fit the I/O panel assembly so that the holding tab on the front of the chassis catches at its bottom securing slot and the I/O panel assembly lines up with the alignment stop. See Figure 3-30.

98

Installing System Components