Dell T105 Systems owner manual Installing System Components

CAUTION: The processor and heat sink can get very hot during normal operation. Ensure that they have had sufficient time to cool before you touch them.

1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 47.

3Detach the diskette cable that is braced on top of the shroud assembly and move it aside.

4Using a #2 Phillips screwdriver, loosen the two captive screws holding the heat sink and shroud assembly in place.

These captive screws are adjacent to the processor cooling fan housing. See Figure 3-21.

5Tilt the heat sink and shroud assembly away from the fan housing on its pivot bracket and lift it out.

80

Installing System Components