Dell T105 Systems owner manual Removing the Power Supply Power supply release tab

7Using a #2 Phillips screwdriver, remove the four Phillips screws that secure the power supply to the back panel.

8Press the power-supply release tab down and slide the power supply toward the front of the system, then lift it out of the system chassis. See Figure 3-27.

9Remove the cable clip and set it aside to attach to the new power supply.

Figure 3-27. Removing the Power Supply

1

2

3

			4
1	power supply release tab	2	power supply
3	screws (4)	4	cable clip

92

Installing System Components