Installing an Expansion Bay Drive
Installing an Expansion Bay Drive
Replacing a CD-ROM or DVD Drive in the Top Bay
WARNING To avoid electrical shock and harm to your eyes by laser, do not open the laser module. The laser module should be serviced by service personnel only. Do not attempt to make any adjustment to the laser unit. Refer to the label on the
1Switch off the PC and remove the PC’s main cover. Refer to page 49.
2Remove the PC’s side panel. Refer to page 53.
3Remove the PC’s front panel. Refer to page 54.
4Disconnect the cables from the rear of the drive.
5Remove the four retaining screws, then slide the old drive out of the front of the PC.
62