
Accessing Internal Components
Accessing Internal Components
Removing and Replacing the Main Cover
WARNING For your safety, disconnect the power cord and all external cables.
To Remove the Main Cover
1Place the PC on a flat surface and stand behind it.
2Disconnect all cables from the rear of the PC.
3Loosen the two thumb screws at the rear of the PC.
4Slide the cover back by about 2 cm (0.6 inches).
5Tip the cover to the side and lift it off.
To Replace the Main Cover
1Position the metal flap on the bottom inside of the cover over the guide rail of the PC, leaving a gap of about 2 cm (0.6 inches) between the cover and the front of the PC.
2Tilt the cover towards the PC.
49