Software Problems

Software Problems

The Power Light Is On But My Software Won’t Run

Have you checked that...

There is no information about what is going on in the accompanying documentation

The software has been correctly installed

Ö

Ö

How

Refer to the application software documentation and/or the operating system documentation for guidance

1Check for any error messages when you try to run the software.

2Remove and then reinstall the software.

3If the problem continues, contact the software manufacturer’s support services.

The Date and Time are Wrong

Have you checked that...

 

How

The battery has not become discharged. This

Ö

Change the date and time, by selecting Settings

may happen when the PC has been

ÖControl Panel ÖDate/Time from the Start menu

unplugged for too long.

 

or use the Setup program (see page 72). If necessary,

 

 

install a new battery (see page 69).

 

You Get the Message “Some necessary system files are corrupted”

 

 

 

Have you checked that...

 

How

You didn’t delete any system files

 

Reinstall the operating system or return the PC to its

 

Ö factory configuration by using the HP Brio Assist CD-

 

 

ROM (System Recovery). Refer to page 43 for more

information.

Forgotten Your PC’s BIOS Password

You have forgotten the password that has

Ö

been set in the Setup program to prevent

unauthorized users from starting your PC

 

1Ask your system administrator, if you have one, to remind you of the password.

2If you cannot find out the password, clear passwords (see page 74). This will allow the PC to start without a password.

31