Replacing the System Board

10 Attach the seven screws.

11Reconnect the following connectors and cables: status panel connector, floppy drive cable, CD-ROM cable, hard drive cable, processor fan cable (if appropriate), power cables and CD audio cable, if you have a CD- ROM, CD-RW or DVD drive. The power and floppy cables should be held in place by the cable clamp under the floppy drive. If you can’t remember how to reconnect them, refer to page 57.

12Replace the power supply unit. Refer to page 52.

13Replace the PC’s main cover. Refer to page 49.

56

Page 64
Image 64
HP BrioBA410 manual Attach the seven screws