HP BrioBA410 Keyboard Test Error, Keyboard cable is correctly connected Ö, Switch off the PC

Models: BrioBA410

1 114
Download 114 pages 62.57 Kb
Page 44
Image 44

My HP Brio Detects an Error at Startup

Keyboard Test Error

Have you checked that...

The keyboard cable is correctly connected Ö

The keyboard is clean and keys are not stuck

Ö

down

The keyboard is working

Ö

 

 

Ö

The keyboard port is working

Ö

 

You are using the latest BIOS for your PC

Ö

If the problem persists, contact your authorized support provider

How

1Switch off the PC.

2Plug the cables into the correct connectors on the back of the PC (you may have problems if you connect the mouse to the keyboard connector).

Check all keys are at the same height, and none are stuck (keyboard)

1Switch off the PC.

2Replace the keyboard by a known working unit.

3Switch on the PC, and check it works.

Run e-DiagTools. Refer to page 42.

1Disconnect the keyboard from the PC.

2Attach the keyboard to another PC of the same model.

3If the keyboard works you may need a new system board. Contact your authorized support provider.

Download the latest BIOS and instructions for its installation from HP’s Web at:

www.hp.com/go/briosupport

36

Page 44
Image 44
HP BrioBA410 Keyboard Test Error, Keyboard cable is correctly connected Ö, Keyboard is working Keyboard port is working