Figure 3-8. Cabling the Optional Diskette Drive to the Hard Drive

7 8

6

1

2

3

4

5

1

system board

2

diskette drive connector

3

diskette drive ribbon cable

4

heat sink shroud tab (2)

5

SATA power convert cable

6

diskette drive ribbon cable

7

cable clip

8

SATA hard drive cables (2)

12Replace the front drive bezel. See "Replacing the Front Drive Bezel" on page 49.

13Close the system. See "Closing the System" on page 47.

14Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.

15Enter the System Setup program and ensure that the drive’s controller is enabled. See "Using the System Setup Program" on page 31.

16(Optional) Test the drive by running the system diagnostics. See "Running the System Diagnostics" on page 127.

56

Installing System Components

Page 56
Image 56
Dell T105 Systems owner manual Diskette drive ribbon cable, Sata power convert cable, Cable clip