Denon AVR-4806CI operating instructions 3

103
Advanced Setup – Part 1
Setting the IEEE1394 Auto Function
•Set whether or not to automatically play the IEEE1394
device when it is selected with the FUNCTION knob.
1Press the CURSOR DDor HHbutton to select
“IEEE1394 Auto Func.” at the “Audio Input
Setup” menu, then press the ENTER button.
•Display the “IEEE1394 Auto Func.” screen.
2Press the CURSOR FFor GGbutton to select
“ON” or “OFF”.
3Press the ENTER button to enter the setting.
•The “Audio Input Setup” menu reappears.
OFF:
Select this if you do not want to automatically play
the device.
ON:
Select this to automatically play the device.
In some cases settings may be required on your player.
Also refer to the player’s operating instructions.
Tuner Presets
¢Auto Preset Memory
•Use this to automatically search for FM broadcasts and
store up to 56 stations at preset channels A1 to 8, B1 to 8,
C1 to 8, D1 to 8, E1 to 8, F1 to 8 and G1 to 8.
1Press the CURSOR DDor HHbutton to select
“Tuner Presets” at the “Audio Input Setup”
menu, then press the ENTER button.
•Display the “Tuner Presets” screen.
2Press the CURSOR DDor HHbutton to select
“Auto Preset Memory”, then press the ENTER
button.
•Switch to the “Auto Preset Memory” screen.
3Press the CURSOR FFbutton to select “Yes”.
•“Search” flashes on the screen and searching
begins.
•“Completed” appears once searching is completed.
•The display automatically switches to the “Tuner
Presets” screen.
•If an FM station cannot be preset automatically due to poor
reception, use the “Manual tuning” operation ( page 66)
to tune in the station, then preset it using the manual
“Preset memory” operation ( page 66).