114
Advanced Setup – Part 1
Press the CURSOR DDor HHbutton to select
“Exit”, then press the ENTER button.
•The “System Setup Menu” reappears.
7
“Base Curve Copy” is displayed after performing the Auto
Setup.
•To restore the settings to their defaults, select “Default Yes
0
”, then press the CURSOR FFbutton.
1Press the CURSOR DDbutton to select “Base
Curve Copy”, then press the CURSOR FF
button.
2Press the CURSOR FFbutton to select “Yes”.
3Press the ENTER button to enter the setting.
The “Manual EQ” screen reappears.
The type of the copied correction curve is displayed in
the upper right of this screen.
If the “Auto Setup” procedure has not been performed, this
item is not displayed.
¢Procedure for copying the “Flat” correction curve