Denon AVR-4806CI 4, 1, 6, 5, 3 4, 5

66
Basic Operation
Manual tuning
1Set the input source to “TUNER”.
2Press the TU (TUNER)
button to select the TUNER
mode.
3Watching the display, press the BANDbutton
to select the desired band (AM, FM or XM).
When listening to the XM satellite Radio ( page
71).
FUNCTION
TUNING
PRESET
MEMORY
ON SCREEN
CHANNEL
NUMBER
SHIFT
BAND
MODE
MEMORY
BLOCK
RDS SEARCH
TUNING
TUNER
TU
(Main unit)
(Remote control unit)
4Press the MODEbutton to set the manual tuning
mode.
Check that the display’s “AUTO” indicator turns off.
5Press the TUNINGbutton to tune in the desired
station.
The frequency changes continuously when the button
is held in.
•When the manual tuning mode is set, FM stereo broadcasts
are received in monaural and the “STEREO” indicator turns
off.
Preset memory
1Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in
the memory.
2Press the TU (TUNER)
button to select the TUNER
mode.
3Press the MEMORY button.
4Press the MEMORY BLOCK(Ato G) button.
The memory block can also be selected by pressing
the SHIFT button.
5Press the CHANNEL button or NUMBER (1to
8) button to select the desired preset channel.
6Press the MEMORY button again.
•Store the station in the preset memory.
•To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
(Remote control unit)
(Remote control unit
in the AMP mode)