38
Connecting Other Sources

Connecting the antenna terminals

DIRECTION OF
BROADCASTING STATION
75 Ω/ohms
COAXIAL
CABLE
FM ANTENNA
FM INDOOR
ANTENNA
(Supplied)
AM LOOPANTENNA
(Supplied)
AM OUTDOOR ANTENNA
GROUND
1
4
23

¢AM loop antenna assembly

Connect to the AM
antenna terminals.
Remove the vinyl tie
and take out the
connection line.
Bend in the reverse
direction.
a. With the antenna
on top any stable
surface.
b. With the antenna
attached to a wall.
Mount
Installation hole Mount on wall, etc.

Connection of AM antennas

1. Push the lever. 2. Insert the
conductor.
3. Return the
lever.
NOTE:
•Do not connect two FM antennas simultaneously.
•Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
•Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
•An F-type FM antenna cable plug can be connected directly.
Note to CATV system installer
•This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC which
provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.