70
Basic Operation
4Press the CHANNEL button.
•Automatically begin the TP search operation.
If no TP station is found with above operation, all the
reception bands are searched.
The station name is displayed on the display after
searching stops.
5To continue searching, repeat step 3.
If no other TP station is found when all the frequencies
are searched, “NO PROGRAMME” is displayed.
FUNCTION
STATUS
CURSOR
FG
CHANNEL
TU
BAND
TUNING
TUNER
CURSORFG
RDS SEARCH
RT (Radio Text)
1Set the input source to “TUNER”.
3Press the RDS SEARCH button until “RTON”
appears on the display.
The main unit’s display switches as follows each time
the RDS SEARCH button is pressed.
•“RT” appears on the display when radio text data is
received.
RDS SEARCHFM PTY SEARCH
RT ON TP SEARCH
Display
While receiving an RDS broadcast station, the text
data broadcast from the station is displayed.
To turn the display off, press the CURSOR FFor GG
button.
If no text data is being broadcast, “NO TEXT DATA” is
displayed.
(Main unit) (Remote control unit
in the AMP mode)
2Press the TU (TUNER)
button to select the TUNER
mode.
(Remote control unit)