20
Easy Setup and Operation
Connecting a microphone
1Connect the microphone forAuto Setup to the
SETUP MIC jack on the front panel of the unit.
2Mount the auto setup microphone onto a
camera tripod, etc., and place it at ear height
at the main listening position in the listening
room with the sound receptor facing the
ceiling.
Microphone
NOTE:
•Do not disconnect the microphone until the settings are
completed.
•Do not change the connection of speakers or the
subwoofer’s volume after performing these measurements.
ON/STANDBY
POWER
SYSTEM SETUP
SETUP MIC
ENTER
CURSOR
AMP
ON
SYSTEM SETUP
CURSOR
ENTER
When placing the microphone, adjust the height so
that the microphone’s sound receptor is at the height
of the ears of the listener.
Be sure that at the beginning, the measurement is
started with the microphone set up at the main
listening position.
It is not possible to measure properly if there are any
obstacles between the speakers and microphone.
Check that there are no obstacles.
Please do not stand between or near the speakers and
the microphone during the measurements.