Denon AVR-4806CI Basic Operation

Basic Operation
43
Operating the remote control unit
•The RC-1036 remote control has a backlit EL display whose
contents change according to the mode or function selected,
with the appropriate remote commands for that mode or
function.
Playback
¢Operate the this unit
The AMP button is the main mode for controlling
the AVR-4806CI in the main room (MAIN ZONE).
The function switches as shown below each time one of
the AMP button is pressed.
AMP
SYSTEM CALL
ZONE 2 ZONE 3
ZONE 4
¢AMP mode
To operate the MAIN ZONE function.
¢ZONE2 mode
To operate the ZONE2 function.
∗:This mode can not be used with the AVR-4806CI.
¢ZONE3 mode
To operate the ZONE3 function.
¢SYSTEM CALL mode
To operate the “System call” function.
•This function provides the ability to program a series of
individual remote control codes into a macro stored under
one of the number pad’s numeric choices ( page 80 ~
85).
SURROUND MODE buttons can not be used with the AVR-
4806CI.
The EL display switches as shown below with respect to
the selected mode.