135
Advanced Setup – Part 2
Setting the Direct Mode Setup
1Press the CURSOR DDor HHbutton to select
“Direct Mode Setup” at the “Auto Setup /
Room EQ” menu, then press the ENTER
button.
•Display the “Direct Mode Setup” screen.
•Perform the ON/OFF setting of Room EQ when the surround
mode is “DIRECT” or “PURE DIRECT”.
2Press the CURSOR FFor GGbutton to select
“ON” or “OFF”.
3Press the ENTER button to enter the setting.
•The “Auto Setup / Room EQ” menu reappears.
Setting the MIC Input Select
1Press the CURSOR DDor HHbutton to select
“Mic Input Select” at the “Auto Setup / Room
EQ” menu, then press the ENTER button.
•Display the “Mic Input Select” screen.
•Sets whether the setup microphone is connected to the PIN
JACK (V.AUX L channel) connector or the MINI JACK (SETUP
MIC) connector.
2Press the CURSOR FFor GGbutton to select
“Mic” or “V.AUX L”.
3Press the ENTER button to enter the setting.
•The “Auto Setup / Room EQ” menu reappears.