120
Advanced Setup – Part 1
ZONE2 and ZONE3 tone control and
channel level setting
•Adjust the sound output from ZONE2 and ZONE3.
1Press the CURSOR DDor HHbutton to select
“Zone2/3 Tone/Ch Lev.” at the “Option Setup”
menu, then press the ENTER button.
•Display the “Zone2/3 Tone/Ch Lev.” screen.
2Press the CURSOR DDor HHbutton to select the
zone whose sound you want to adjust (ZONE2,
ZONE3), then press the ENTER button.
•Switch to the setting screen.
Example: When “Zone2” is selected
3Press the CURSOR DDor HHbutton to select the
item to be set, then press the CURSOR FFor GG
button to adjust the parameter.
Bass:
Adjust the tone for the bass.
Channel Level:
Set so that the playback level is the same for the
left and right channels. (The volume can adjusted
between –12 dB and +12 dB in steps of 1.0 dB.)
Treble:
Adjust the tone for the treble. (The bass or treble
sound can be adjusted between –12 dB and +12
dB in steps of 2.0 dB.)
HPF:
Set this to “ON” if your speakers do not have a
very strong capacity for producing low bass. Using
the high pass filter makes it possible to reduce
distortion of the bass sound.
Press the ENTER button.
•Return to the “Zone2/3 Tone/Ch Lev.” screen.
Use the same procedure to make the settings for
ZONE3.
4
•The “Channel Level” setting is only possible when ZONE2
or ZONE3 is set to “Stereo” in the “Channel Setup” menu.
Press the CURSOR DDor HHbutton to select
“Exit”, then press the ENTER button.
•The “Option Setup” menu reappears.
5