110
Advanced Setup – Part 1
Display Mode:
Mode 1:
Flickering is not prevented.
Mode 2:
Prevents flickering of the on screen display when
there is no video signal.
Use this mode if the on screen display does not
appear in the Mode 1, as may happen according to
the TV being used.
Setting the On Screen Display (OSD)
Use this to turn the on screen display (messages other than
the menu screens) on or off.
Sets the on screen display’s display mode.
1Press the CURSOR DDor HHbutton to select “On
Screen Display” at the “Video Setup” menu,
then press the ENTER button.
Display the “On Screen Display” screen.
2Press the CURSOR DDor HHbutton to select the
item to be set, then press the CURSOR FFor GG
button to select the parameter.
3Press the ENTER button to enter the setting.
The “Video Setup” menu reappears.
Function/Mode Status:
Set whether or not to turn on the on screen display
of the input source name and input mode when an
input source is selected.
Master Volume Status:
Set whether or not to turn on the on screen display
of the main volume level when the main volume is
operated.
4Press the CURSOR DDor HHbutton to select
“Exit”, then press the ENTER button.
•The “System Setup Menu” reappears.