Denon AVR-4806CI 1, 3, 4, 6

75
Basic Operation
¢Network settings
When using a broadband router (DHCP function), the
network settings are made automatically, so there is no
need to make the settings from the setup menu.
If the broadband router’s DHCP function is turned off, make
the “Network Setup” ( page 123, 124).
•The required system connections and settings must be
made in order to listen to Internet radio.
“Update?” appears on the display when connecting to an
Internet radio station for the first time.
Listening to Internet radio
1Either turn the FUNCTION knob or press the
AUXbutton to select “NetAudio” (AMP mode).
•The “Network Audio” menu screen appears.
2Press the CURSOR DDor HHbutton to select
“Internet Radio”, then press the ENTER or
CURSOR GGbutton.
•The initial screen when not connected to the Internet
is displayed.
(Remote control unit in the AMP mode)(Main unit)
3Connecting to an Internet radio station for the
first time:
Press the ENTER or CURSOR GGbutton.
•The update screen appears.
ENTER
CURSOR
FUNCTION
CURSOR
AUX
ENTER
During playback, press the ENTER button once to
pause playback, then press ENTER button again to
resume playback.
If the ENTER button is pressed and held in for more
than two seconds when in the play or pause mode,
playback stops and the previous menu window
reappears.
Finally, the list of Internet radio stations is displayed
and those that can be played are indicated by the “∗”
mark in front of them.
4Press the ENTER or CURSOR GGbutton once
again.
•The latest list of radio stations is downloaded from
the vTuner site. (Several minutes are required for this
download.)
5Press the CURSOR DDor HHbutton to select the
desired setting item, then press the ENTER or
CURSOR GGbutton.
6Press the CURSOR DDor HHbutton to select the
desired radio station, then press the ENTER or
CURSOR GGbutton.
•Connection starts, and the station starts playing
once the buffer reaches “100%”.