Denon AVR-4806CI DENON original surround modes, Surround modes and their features

WIDE SCREEN

Basic Operation

DENON original surround modes

•The AVR-4806CI is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to

synthetically recreate the sound field. One of nine preset surround modes can be selected according to the program source and

the parameters can be adjusted according to the conditions in the listening room to achieve a more realistic, powerful sound.

Surround modes and their features

¢Personal Memory Plus

This set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes

selected for the input different sources. When the input source is switched, the modes set for that source last time it was

used are automatically recalled.

The surround parameters, tone control settings and playback level balance for the different output channels are memorized for

each surround mode.

SUPER

STADIUM

ROCK ARENA

JAZZ CLUB

CLASSIC

CONCERT

MONO MOVIE

(NOTE)

VIDEO GAME

7CH STEREO

Select this when watching baseball or soccer programs to achieve a sound as if you were actually at

the stadium. This mode provides the longest reverberation signals.

Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from

all directions.

This mode creates the sound field of a live house with a low ceiling and hard walls. This mode gives

jazz a very vivid realism.

Select this for the sound of a concert hall rich in reverberations.

Select this when watching monaural movies for a greater sense of expansion.

Use this to enjoy video game sources.

Select this to achieve an atmosphere like that of a movie theater with a large screen. In this mode,

all signal sources are played in the 7.1-channel mode, including Dolby Surround and Dolby Digital 5.1-

channel sources. Effects simulating the multi surround speakers of movie theaters are added to the

surround channels.

The front left channel signals are output to the surround and surround back signal left channels, the

front right channel signals are output to the surround and surround back signal right channels, and the

in-phase component of the left and right channels is output to the center channel. Use this mode to

enjoy stereo sound.

8MATRIX

Select this to emphasize the sense of expansion for music sources recorded in stereo. Signals

consisting of the difference component of the input signals (the component that provides the sense

of expansion) processed for delay are output from the surround channel.

Depending on the program source being played, the effect may not be very noticeable.

In this case, try other surround modes, without worrying about their names, to create a sound field suited to your tastes.

NOTE: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel (left

or right), so input signals to both channels. If you have a source component with only one audio output (monophonic

camcorder, etc.) obtain a “Y” adaptor cable to split the mono output to two outputs, and connect to the L and R inputs.