115
Advanced Setup – Part 1
Option Setup
•Make other expert settings.
Setting the Channel Setup
•With this setting it is possible to change the number of
channels played in the different zones according to the
purpose.
This configures the AVR-4806CI according to whether or
not you have surround “B” speakers connected, and
whether or not you have surround back (SB) speaker(s)
connected.
The number of channels output from the pre-out terminals
exclusively for ZONE2 and 3 can be set to “Mono” or
“Stereo” according to the method of playback in the
various multi-zones.
Adjustments made in this section will have an effect on the
various “Power Amp Assign” setting options ( page 116,
117).
1Press the CURSOR DDor HHbutton to select
“Option Setup” at the “System Setup Menu”,
then press the ENTER button.
•Display the “Option Setup” menu screen.
3Press the CURSOR DDor HHbutton to select the
zone, then press the CURSOR FFor GGbutton to
select the channel setting.
4Press the ENTER button to enter the setting.
•The “Option Setup” menu reappears.
2Press the CURSOR DDor HHbutton to select
“Channel Setup”, then press the ENTER
button.
•Display the “Channel Setup” screen.
Main Zone:
•Surr. B:
Not Used:
Select if you do not have speakers connected to
Surround “B”.
Used:
Select if you have speakers connected to Surround
“B”.
•S. Back:
2sp:
Select if you have a pair of surround back speakers
connected (SBL & SBR).
1sp:
Select if you have one surround back speaker
connected to SBL.
Not Used:
Select if you do not have surround back speaker(s).
Zone2:
•Stereo:
Select for stereo playback in ZONE2 (two channels).
•Mono:
Select for monaural playback in ZONE2 (one channel).
Zone3:
•Stereo:
Select for stereo playback in ZONE3 (two channels).
•Mono:
Select for monaural playback in ZONE3 (one channel).
If “Mono” is selected for ZONE2 or ZONE3, monaural
(single channel) sound is output from both of the
ZONE2 or ZONE3 left and right channels pre-amp
output terminals.