40
Connecting Other Sources

Connecting the TRIGGER OUT terminals

Turn the DC 12V voltage on and off for the
individual functions and surround modes.
For details, see “Setting the Trigger Out” (
page 119).

Connecting the MULTI ZONE terminals

Power amplifier

(ZONE2 or ZONE3)

R
L
IN

TV (Monitor)

(ZONE2 or ZONE3)

S VIDEO
IN
VIDEO
IN
+
+
RC-617
INFRARED
SENSOR
RC-616
INFRARED
RETRANSMITTER
INPUT OUTPUT
AUX OUT
R
L
R
L

H

I

A

For instructions on operations using the MULTI ZONE functions ( page 90 ~ 93).

ZONE2 (or ZONE3) pre-out connections

•If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 (or ZONE3) pre-out (variable/fixed level)
terminals can be used to play a different program source in ZONE2 (or ZONE3) the same time ( page 92, 93).
•The ZONE2 (or ZONE3) video out is only for the ZONE2 (or ZONE3).
•When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the
MAIN ZONE and ZONE2 (ZONE3), the remote-controllable devices in the MAINZONE can be controlled from ZONE2 (ZONE3)
using the remote control unit.
Extension terminals for future use.
NOTE:
•For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no humming or noise.
•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.