56
Basic Operation

Dolby Pro Logic IIx (Pro Logic II) mode

•To play in the PLIIx mode, set “Sp.Back” at the Speaker
Configuration setting to “1spkr” or “2spkrs”.
•To play in the PLIIx mode, set “Surround Back” at the Power
Amp Assign setting.
•This mode is optimal for playing program sources recorded
in Dolby Surround.
1Press the STANDARD button to select “Dolby

Pro Logic IIx” mode.

•The Dolby Pro Logic indicator
lights.
The mode switches as shown
below each time the STANDARD
button is pressed.
lights
DTS NEO:6DOLBY PLIIx
3Press the SURROUND PARAMETERbutton.
•Display the “Surround Parameter” menu.
2Play a program source .
For operating instructions, refer to the manuals of the
respective components.
4Press the CURSOR FFor GGbutton to select the

play mode.

When the “SB CH OUT” parameter is set to “ON”.
(Set “SP.Back” at the System Setup to “1spkr” or
“2spkrs”).
Display
MODE: PL x C
*Surr Parameter
MODE: PL x M
*Surr Parameter
MODE: PL x G
*Surr Parameter
(Pro Logic IIx Cinema
mode)
(Pro Logic IIx Music
mode)
(Pro Logic IIx Game
mode)
When the “SB CH OUT” parameter is set to “OFF”.
(Set “SP.Back” at the System Setup to “None”).
Display
MODE: PL C
*Surr Parameter
MODE: PL M
*Surr Parameter
MODE: PL G
*Surr Parameter
*Surr Parameter
MODE: DOLBY PL
(Pro Logic II Cinema
mode)
(Pro Logic II Music mode)
(Pro Logic II Game mode)
(Dolby Pro Logic mode)
SURROUND
PARAMETER
STANDARD ENTER
CURSOR

CURSOR

SURROUND
PARAMETER

ENTER

STANDARD