121
Advanced Setup – Part 1
Setting the Digital Out Assignment
•The optical digital output terminals on the AVR-4806CI’s rear
panel (OPTICAL2 to 4 OUT) normally function in association
with the ZONE3/REC SELECT mode. With this setting, the
OPTICAL 2 OUT terminal can be used in association with the
ZONE2 SELECT mode.
1Press the CURSOR DDor HHbutton to select
“Digital Out Assign” at the “Option Setup”
menu, then press the ENTER button.
•Display the “Digital Out Assign” screen.
2Press the CURSOR FFor GGbutton to select
whether to associate the OPTICAL2 OUT
terminal to the “ZONE3/REC SELECT” or
“ZONE2 SELECT” mode.
3Press the ENTER button to enter the setting.
•The “Option Setup” menu reappears.
User Memory
•The currently set settings (system setup, surround
parameters, etc.) can be stored in the memory. The stored
settings can be called out when needed.
1Press the CURSOR DDor HHbutton to select
“Setup Memory / Lock” at the “Option Setup”
menu, then press the ENTER button.
•Display the “Setup Memory / Lock” screen.
2Press the CURSOR DDor HHbutton to select
“UserMemory”, then press the ENTER button.
•Switch to the “User Memory” screen.
3Press the CURSOR FFbutton to select “Yes”.
•About 30 seconds are required for the settings to be
stored in the memory.
Once the settings are stored in the memory, “Load” is
displayed and the settings can be loaded.
4Press the CURSOR DDor HHbutton to select
“Exit”, then press the ENTER button.
•Return to the “Setup Memory / Lock” screen.