Diamondback 1260Ef Dot Matrix/Profile Display Heart Rate Bar Graph, Message/Workout Data display

1260OM 5/31/06 7:11 PM Page 16

Dot Matrix/Profile

display

Heart Rate Bar Graph

display

The most effective Heart rate

zone: 60%-85%

Message/Workout

data display

Console (continued)

DISPLAYS

a.Dot Matrix /Profile display

1.It displays the program profile during the program setup and executing modes.

•Display the Intensity profile & incline profile during the Classic & Cross training programs.

•Display the % Max HR profile & incline profile during the HR interactive programs

2.Profile definitions:

•Intensity profile – The LED represents the resistance level, L1- L20; the higher LED lights up, the higher resistance it is on. The LED will blink to indicate the current workout segment.

•Incline profile – The LED represents the incline level, L1 - L10. The top LED will blink to indicate the current workout segment.

•% Max HR profile – The LED represents the % Max HR: 0-100%

3.If you choose the incline as the data display, it will switch the default intensity pro file display or % Max HR profile display into Incline profile display as well.

4.If Incline UP/DOWN key is pressed to adjust the incline, the profile display will be switched to “Incline profile” and shows the adjustment until the adjustment is done.

b.Heart rate bar graph display

1.The ♥ will light up and blink once there is a valid pulse detected.

2.It will light up the % Max HR during a program, if there is a valid pulse detected.

3.It will use the default age for % calculation unless there is an age entry during setup.

C. Message/Workout data display

1.During a program setup, this display will scroll the messages to guide you through the setup process.

2.In the Cross Training and Personal Trainer programs, it will display additional messages to focus on your total body workout.

3.During workout, it also acts as data display window and display four data at the same time. You may select your favorite 4 displays by pressing the “SELECT” button under each group at any time.

•Time (hr: min or min: sec): The remaining of current program time.

•Segment time (min: sec): The remaining of current segment time.

•Watts (watt): Current workout wattage.

•Intensity (level 1-20): Current workout intensity level.

•Incline (level 1-10): Current workout incline level.

•% Max HR (%): Current workout % Max HR. If there is no pulse, it will display “ - - - “ instead.

12 1260Ef Owner’s Manual