DreamGEAR MSK 33 manual Sat Operation, Sat menu

Sat Operation

Sat menu

BACK

<>sat frq

LNB

CONTROL

analog digit

DVBS

SAT

MEASURE

Call up the main menu

Entry of the transponder frequency from 00,000 MHz to16,000 MHz

The field lights up yellow, as soon as a softkey is pressed. Now, the transponder frequency can be entered-in using the numerical buttons „0-9“ and „MHz“ or changed with the cursor buttons, ◄►. The transponder frequency is displayed in the lower left-hand corner of the on screen display. The receiving frequency de- pends on the selected LO frequency. The setting of the LO frequency is made in the menu ‚LNB-CONTROL.‘ The entry of the Sat IF is only possible, if the LO fre- quency LO-0 (00000) has been set.

If the oscillator frequency (LO-0 to LO-9) is set, and the resulting receiving frequency lies out of the Sat receiving range

(920...2150 MHz) of the MSK 33, this display shown on the left appears. Correct the LO frequency or the frequency entry after this message appears.

￿Example

Reception and level measurement of a Sat programme:

Transponder frequency 11,348 MHz vertical with a LNB with a LO frequency of 9.75 MHz.

By pressing the softkey SAT in the main menu, the unit switches to satellite recep- tion.

25