DreamGEAR MSK 33 MPEG Decoder Menu Optional, PAT 08 ZDF, Norm dig. television Statusrunning CAno

MPEG Decoder Menu (Optional)

----	PAT (08) --00--
>ZDF	<

3sat KiKa

Phoenix

ORF

Video-PID: 1040 MPEG 2V

Audio-PID: 1042 MPEG 2A

Norm: dig. television

Status:running CA:no

---- PAT (08) --00--

>ZDF<

After calling up this MPEG menu, you BACK receive the PAT list for selecting the

desired video or audio programme from the digital measurement for SAT, TV, IF

▲ or return path. Moreover, the PID numbers of the selected programme are displayed.

▼The data from the MPEG decoder

	appears In the last two lines.
show
	Make sure, that the symbol rate and the
PAT	code rate are correctly set in the digital
manual	menu. If this isn’t the case, the message,
V-PID	„Frontend not locked,“ appears. Possibly
	control this in the constellation analysis.
manual
	You receive the message „NO PAT,“
A-PID	when no programme list is found.

The programme access table shows the available video and audio channels on the MPEG transport stream. Eight pro- grammes are available; five of them are displayed. The programme, 00, is decoded and the picture is shown.

With the arrow softkeys, the desired programme can be selected.

Video-PID:1040 MPEG 2V Audio-PID:1042 MPEG 2A

Here, the video and audio programme identify codes of the selected programme are displayed. By pressing the buttons „manual V-PID“ and „manual A-PID,“ the PIDs can be en- tered in by hand with four digits.

The button „show PAT“ starts the repeated search for the programme list.

Status display of the MPEG decoder:

Norm: dig. television Status:running CA:no

Norm: dig. television, dig. audio, data broadcast or reserved

Status: running, not run, wait sec, pausing, undefined or reserved

CA: conditional access yes /no

Scrambled yes / no

57