DreamGEAR MSK 33 DiSEqC menu, RX assessment, Transmitting and receiving a DiSEqC command TX + RX

Sat Operation

DiSEqC menu

With the MSK 33, DiSEqC commands can be sent (TX) and received (RX). The code words –framing, address, command, data- are displayed on the screen in the upper RX display field for received DiSEqC commands and in the lower TX display field for transmitted DiSEqC commands. Two additional display fields are available for the explanation of the DiSEqC commands. The DiSEqC code words can be en- tered-in and edited in hexcode.

RX assessment

tx

tx input

After pressing the appropriate key, the field lights up yellow for ca. 3 seconds. During this time, DiSEqC commands can be received and assessed. The display of the received DiSEqC command appears in the RC display field.

Transmitting and receiving a DiSEqC command (TX + RX)

tx + rx The set DiSEqC com- mand in the TV display field is transmitted after pressing this button.

Afterwards, the MSK 33 switches to re- ception, in order to assess a sent back DiSEqC command, and the RX field lights up yellow (only for DiSEqC systems). For DiSEqC 2.0 systems, confirmation will not be sent back.

Sending a DiSEqC command (TX)

After pressing this button, the set DiSEqC command in the TX display field is transmitted.

(In the COPY menu, various pre-programmed DiSEqC commands can be called up under „recall 85…90“)

Entry of the hex numbers

Calls up a submenu for entering the DiSEqC command.

RX display field

The received DiSEqC command is represented in the RX dis- play field.

If no DiSEqC command is received, the display shown on the left appears.

30