DreamGEAR MSK 33 TV Operation, TV menu, digit. DVBT, rf frq TV CONTROL analog, Tv Measure

TV Operation

TV menu

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿70

C10 210.25MHz A65.0dBµV

BACK

<> rf frq

TV CONTROL analog

>

TV MEASURE

Calls up the main menu

Frequency entry of 44.75-867.2 MHz / DVB-T / BIII / UHF

The field lights up yellow as soon as the softkey is pressed. Now, the frequency can be entered-in with

numerical buttons, „0...9,“ and „MHz“ or changed with the cursor

buttons, ◄►, in 50 kHz increments. The frequency is displayed in the lower left- hand corner of the screen.

Mid-channel display

Receiving frequency is optimally set

If a large „C“ or „S“ appears on the screen, the fre- quency is set to mid-channel.

The entered frequency is not in mid-channel of the respective RF standard, if a small „c“ or „s“ does not appear.

Frequency is not optimally tuned

Entering in a channel

<> rf chan >

This field lights up yellow, as soon as the softkey is pressed. The channel can be entered with two digits with the numerical buttons, „0...9“ or changed with the cur- sor buttons, ◄►.

A large „C“ appears in front of the channel display, when a channel is optimally tuned.

Entering a special channel

By pressing the softkey once more, „chans“ appears in the menu field. A special channel not now be entered-in.

For tuning to a special channel, a large „S“ appears in front of the channel display.

Selecting analogue, DVB-C and DVB-T measurement

analog	digit.
>	>

Calling up the menu TV control

digit. DVBT>

In this menu, all remotely controlled parameters such as remote power feeding voltage, 22 kHz, DiSEqC, tone burst (Simple DiSEqC) and V-SEC are set.

43