DreamGEAR MSK 33 Checking the LNB supply voltage of a satellite receiver, DiSEqC, Sat Operation

Sat Operation

Checking the LNB supply voltage of a satellite receiver

Connect the satellite receiver (IF input) with the MSK 33 (RF input socket). Switch the supply voltage of the MSK 33 OFF and the voltage of the receiver ON. You can now read the output voltage on the screen.

Calling up the DiSEqC/V SEC menu

DiSEqC

VSEC

In this menu, all the DiSEqC/V SEC control possibilities can be set ( refer to section ‚DiSEqC/V-SEC menu‘).

In case the MSK 33 is equipped with the option External DC, the LNB voltage must be disconnected to charge the internal accumulator via this socket. Otherwise, the internal accumulator will not be charged during LNB operation.

29