Sat Operation

Setting of the LNB voltage supply:

LNB: U= 14,0V I=181mA

LNB control menu

Selecting the LO frequency

BACK

22kHz

off

14.0V on > 18.0V off>

09750 Lo 1>

DiSEqC

VSEC

Activate the supply voltage for vertical polarisation 14.0 V in the LNB-CONTROL menu. In the upper display field, the supply voltage (14.0 V) and the current draw of the LNB (181 mA) are displayed. Press the BACK button to open the Sat menu once more.

Press the LNB-CONTROL button in the Sat menu. With the button LO, you can request nine preset LO frequencies. Set LO1 (09750) in the field. With the BACK button, open the Sat menu again.

Entering the transponder frequency:

BACK

<>sat frq

LNB

CONTROL

digit

DVBS analog

SAT

MEASURE

Press the button sat frq and enter the transponder frequency 11299 MHz with the numerical buttons. Confirm the entry with the MHz button. You will now see the frequency and level in the lower display field.

SAT menu

26

Page 26
Image 26
DreamGEAR MSK 33 manual Setting of the LNB voltage supply, Selecting the LO frequency, Entering the transponder frequency