DreamGEAR MSK 33 Scope Menu, audio DiSEqC, audio video, Video scope menu, S/N measurement, Back

Scope Menu

BACK

video

audio video

DiSEqC

audio

DiSEqC

The last set menu is called up.

With this button, you can switch on the video scope.

Switches on the audio scope menu.

Switches on the DiS- EqC scope.

Video scope menu

BACK

zoom + x zoom - x signal /noise rflev +0dB sample 1

The last set menu is called up.

Horizontal zoom –Enlarging the video signal

By pressing this button, the video signal can be zoomed

on the screen. Eight zoom stages are available. Each time the button is pressed, the zoom switches to the next stage. If the field no longer lights up yellow, the highest zoom stage is reached.

Horizontal zoom – Reducing the video signal

By pressing this button, the video signal can be reduced on the screen. Eight zoom stages are available. Each time the button is pressed, the zoom switches to the next lower stage. If the field no longer lights up yellow, the lowest zoom stage is reached.

S/N measurement

The S/N measurement is carried out, in order to measure the signal-to-noise spac- ing of TV and Sat signals. The S/N measurement is carried out weighted with CCIR filters. The measurement of the noise level is carried out in an empty line; the line must be manually set. With the „zoom x“ button, the video signal is set in such a way, that no synchronised impulse or picture content are shown on the TFT screen. By pressing the softkey, the S/M measurement begins. The measured S/N value appears afterwards on the screen.

65