DreamGEAR MSK 33 System Menu, date, time, click off fact. setup serv, Calls up the SYS TEM menu

System Menu

-SOFTWARE-VERSIONS- BE --- -- ----

S0 operating system

S1 FPGA firmware

S0 = V8.1 S1 =V2.1

SN : 00612

TIME: 14:31:26

DATE: 14.11.01

BACK

time

date

click off

fact. setup

serv

Calls up the SYS-

TEM menu

The screen displays the

following in the individual fields: Software versions of the modules

(S0 shows information about the operating software, S7 shows the software of the graphic card). These are followed by the series number (SN: -------) as well as the

time and date.

Setting the date

Press the softkey. The field „DATE“ lights up yellow and the date field flashes. The date can now be entered in with the numerical buttons.

Setting the time

Click button

click off

Factory setting

Note:

￿

After pressing this softkey, the field „TIME“ lights up yellow and the time field flashes. The time can now be entered in with the numerical buttons.

With this button, a peep tone for the keyboard can be generated and switched off.

By pressing this button, all display settings can be reset to the factory settings.

No user function. It is only required for service purposes.

From the software version S0=V7.0 and higher, the graphic software S1=2.1 must be downloaded.

S1=V2.1 is not downwards compatible. It can not longer carry out a pano- ramic printout.

60