3.Press ↑ or ↓ until the depth is correct, then press ENT.
4.Press ← to SHALLOW ALARM ENABLEDENTEXIT.
5.To turn off the alarm, press MENUMENU↓ to ALARMSENT ↓ to
SONAR ALARMSENTENTEXIT.
To switch to a different depth setting, open the Sonar Alarms menu and repeat the instructions in step 3 above.
To adjust and turn on the deep alarm:
1.Press MENUMENU↓ to ALARMSENT ↓ to SONAR ALARMSENT.
2.Press ↓ to DEEP ALARM DEPTHENT.
3.Press ↑ or ↓ until the depth is correct, then press ENT.
4.Press ← to DEEP ALARM ENABLEDENTEXIT.
5.To turn off the alarm, press MENUMENU↓ to ALARMSENT ↓ to
SONAR ALARMSENT↓ to DEEP ALARM ENABLEDENTEXIT.
To switch to a different depth setting, open the Sonar Alarms menu and repeat the instructions in step 3 above.
Zone Alarm
The zone alarm is triggered when any echo passes inside the zone alarm bar, shown on the right side of the screen.
To adjust and turn on the zone alarm:
1.Press MENUMENU↓ to ALARMSENT↓ to SONAR ALARMSENT.
2.Press ↓ to ZONE ALARM ENABLED→ to ADJUST ZONEENT.
At left, Sonar Alarms menu, with Adjust Zone command selected. At right, Adjust Zone Alarm selection box, with Upper Limit selected.
45
