Plotter screen showing Find Waypoint.
7.To clear the search and return to the last page displayed, press EXITEXIT. (Before you completely exited out of the Search menus, you could have gone looking for another place.)
Navigate To a Waypoint
You can select any waypoint visible on the Plotter Page with the cursor, then use the Navigate to Cursor command (we described how to do that earlier in this section). However, you can avoid scrolling the plotter to pick your waypoint if you use the Find Waypoint commands:
1.Press WPT. To look up the nearest waypoint, just press ENT; or, to look by name (and scroll through the entire waypoint list), press ↓ to FIND BY NAMEENT. For this example, look by name.
2.If your waypoint list is a long one, you can spell out the waypoint name in the FIND BY NAME box to search for it. (Press ↑ or ↓ to change the first character, then press → to move the cursor to the next character and repeat until the name is correct, then press ENT to jump to the list below.)
3.If the list is short, you can jump directly to the FIND IN LIST box by pressing ENT. Use ↑ or ↓ to select the waypoint name, press ENT and the waypoint information screen appears with the GO TO command se- lected.
4.To begin navigating to the waypoint, press ENT.
88
