You can save and recall up to 10 different plot trails.
Tip:
Another quick way to stop recording one trail and begin a new one is to use the New Trail command: Press MENUMENU↓ to MY TRAILSENTENT.
Caution:
You also have the option of completely turning off trail record- ing, under the trail Options command. However, if the Update Active Trail option is left turned off, it will cancel the automatic trail creation feature.
Delete a Trail
This is the command used to erase or delete a trail: Press MENUMENU↓ to MY TRAILSENT↓ to trail nameENT→ to DELETE TRAILENT← to YESENT.
Tip:
You can also delete all trails at once:
1.Press MENUMENU↓ to MY TRAILSENT.
2.Press → to DELETE ALLENT← to YESENT.
Display a Saved Trail
The active trail is automatically displayed on the plotter (the "Visible" option) with the factory default settings. You can selectively turn trail display off and on for any saved or active trail. In the Saved Trails List, visible trails have a check mark in front of the trail name.
To turn off trail display:
1.Press MENUMENU↓ to MY TRAILSENT.
2.Press ↓↓ to enter the Saved Trail list, then use ↑ or ↓ to select the desired Trail NameENT.
3.Press ↓ to ACTIVE→ to VISIBLEENT. To return to the previous page, press EXITEXITEXITEXIT.
To turn on trail display:
1.Press MENUMENU↓ to MY TRAILSENT.
2.Press ↓↓ to enter the Saved Trail list, then use ↑ or ↓ to select the desired Trail NameENT.
3.Press ↓ to ACTIVE→ to VISIBLEENT. To return to the previous page, press EXITEXITEXITEXIT.
92
