To delete a waypoint from the plotter:
1.Use the arrow keys to select the waypoint with the cursor.
2.Press WPT→ to DELETEENT← to YESENT. To return to the previ- ous page and clear the cursor, press EXIT.
To delete all waypoints at one time: press MENUMENU↓ to SYSTEM
SETUPENT↓ to DELETE ALL MY WAYPOINTSENT← to YESENT. To return
to the previous page, press EXITEXIT.
Edit a Waypoint
Waypoint Name
To edit waypoint name: 1. Press WPTENT↓ to waypoint nameENT→
to EDIT NAMEENT.
2.Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the name is correct. Press ENT then EXITEXIT to return to the previous page display.
Waypoint Symbol
To edit waypoint symbol: 1. Press WPTENT↓ to waypoint nameENT→ to EDIT SYMBOLENT.
2.Use arrow keys to select desired symbol and press ENT. To return to the previous page, press EXITEXIT.
Waypoint Position
To edit waypoint position: 1. Press WPTENT↓ to waypoint
nameENT→ to EDIT POSITIONENT.
2.Latitude: press ↓ to LATITUDEENT. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the lati- tude is correct. Press EXIT.
3.Longitude: press ↓ to LONGITUDEENT. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the lon- gitude is correct. Press EXIT.
4.When latitude and longitude are correct, return to the previous page: press EXITEXITEXIT.
Select a Waypoint
To select a waypoint on the plotter (for navigating to, for editing, etc.), use the arrow keys and center the cursor over the waypoint. A high- lighted halo will appear around the waypoint.
Find a Waypoint
To access a waypoint stored in your unit's memory, press the WPT key. You'll see the Waypoint Menu, which offers these commands: FIND BY
NEAREST, FIND BY NAME, and CREATE NEW.
86
