Navigation Page

This screen has a compass rose that not only shows your direction of travel, but also the direction to a recalled waypoint. To get to the Navi- gation Page: Press PAGES← to GPS↑ or ↓ to NAVIGATIONEXIT.

The navigation screen looks like the one below when you're not navi- gating to a waypoint or following a route or trail. Your position is shown by an arrow in the center of the screen. Your trail history, or path you've just taken, is depicted by the line extending from the arrow. The arrow pointing down at the top of the compass rose indicates the cur- rent track (direction of travel) you are taking.

Track or compass heading indicator, showing direction of travel

Compass

rose

Present

Trail line position arrow

Navigation information displays

Navigation Page, recording a trail, traveling east. Page looks like this when the unit is not navigating to a waypoint , following

a route, or backtracking a trail.

When navigating to a waypoint, the Navigation screen looks like the following figure. Your ground speed, track, distance and bearing to waypoint, and course are all shown digitally on this screen.

NOTE:

Remember, when the Speed, Track and Position information dis- plays are flashing, satellite lock has not been achieved and no posi- tion fix has been determined. A question mark will also flash on the present position arrow in the center of the compass rose.

74

Page 80
Image 80
Eagle Electronics Cuda 240 S/GPS manual Navigation