eMachines H3120 manual Installing memory, 148, To install or replace Dimm memory

CHAPTER 13: Adding and Replacing Components www.emachines.com

Installing memory

When you upgrade the computer memory, make sure that you install the correct type of memory module for your computer. Your computer uses DIMM memory.

To install or replace DIMM memory:

1Remove the side panel by following the instructions in “Removing the side panel” on page 144.

2For more stability, place your computer on its side. To avoid scratching the case, place it on a towel or other non-abrasive surface.

3Find the memory module banks on your system board.

Important

Your computer’s memory location may vary from the illustration below.

4If you are removing a DIMM from the memory module bank, gently pull the plastic tabs away from the sides of the memory module and remove it.

- OR -

If you are adding a DIMM to an empty memory module bank, gently pull the plastic tabs away from the sides of the memory module bank.

5Align the notches on the new DIMM with the notches on the memory module bank and press the module firmly into the bank. The tabs on the sides of the memory module bank should snap in and secure the memory module automatically.

148