eMachines H3120 Adding or replacing a CD or DVD drive, 150, To add replace a CD or DVD drive

CHAPTER 13: Adding and Replacing Components www.emachines.com

Important

Your computer’s battery location may vary from the illustration below.

9Make sure that the positive (+) side of the new battery is facing up, then press the battery into the socket until it snaps into place.

10Replace the side panel by following the instructions in “Replacing the side panel” on page 147.

11Turn on your computer.

12Open the BIOS Setup utility and restore any settings that you wrote down in Step 3.

13Save your settings and exit the BIOS Setup utility.

Adding or replacing a CD or DVD drive

Tips & Tricks

You need a Phillips screwdriver to add or replace a CD or DVD drive.

To add replace a CD or DVD drive:

Important

The color and shape of your replacement component's front cover may vary from your original component.

1Remove the side panel by following the instructions in “Removing the side panel” on page 144.

2Remove the front bezel by following the instructions in “Removing the front bezel” on page 146.

3If you are replacing an existing drive, remove the two screws that secure the drive to the drive bay. If you are adding a new drive, go to Step 6.

Screws

150