eMachines H3120 Removing the front bezel

CHAPTER 13: Adding and Replacing Components www.emachines.com
146
Removing the front bezel
Caution
There are cables connected to the back of
the bezel. When the bezel is loose from
the case:
Carefully set the bezel to the side of the
case with the cables attached.
- OR -
Disconnect the cables from the system
board so you can remove the front bezel
and cables from the computer.
To remove the front bezel:
■Position the computer where you can grasp the top front edge of the
bezel, then pull the bezel away from the case. Continue to loosen the bezel
until you can remove it from the front of the case.