www.emachines.com

Adding or replacing a CD or DVD drive

4Disconnect the power, data, and sound (if attached) cables from the back of the drive.

5Slide the drive out of the case toward the front.

6Slide the new drive into the drive bay from the front of the case.

7Connect the power, data, and sound cables (if necessary) to the back of the drive.

8Use the two screws you removed previously to secure the drive to the drive bay.

9Replace the front bezel by following the instructions in “Replacing the front bezel” on page 147.

10Replace the side panel by following the instructions in “Replacing the side panel” on page 147.

151

Page 158
Image 158
eMachines H3120 manual 151