Emerson 3000 instruction manual World Class, Instruction Bulletin, Appendix A Rev. 3.9 May

Instruction Bulletin

Appendix A Rev. 3.9 May 2005

World Class 3000

Table A-1. Specifications for Oxygen Analyzing Equipment.1, 2

Probe lengths, nominal	18 inches (457 mm), 3 feet (0.91 m), 6 feet
	(1.83 m), 9 feet (2.74 m), or 12 feet (3.66 m),
Temperature limits in process	depending on duct dimensions
measurement area	50° to 1300°F (10° to 704°C)
Standard/current output	4-20 mA dc signal (factory set)
O2 indication (Digital display
and analog output)	0.1% O2 or ±3% of reading, whichever is
	greater using Rosemount Analytical calibration
	gases
System speed of response	less than 3 seconds (amplifier output)
Resolution sensitivity	0.01% O2 transmitted signal
HPS 3000 housing	NEMA 4X (IP56)
Probe reference air flow	2 scfh (56.6 L/hr) clean, dry, instrument quality
Calibration gas mixtures	air (20.95% O2), regulated to 5 psi (34 kPa)
	Rosemount Hagan Calibration Gas Kit Part No.
	6296A27G01 contains 0.4% O2N2 Nominal and
Calibration gas flow	8% O2N2 Nominal
	5 scfh (141.6 L/hr)
HPS 3000 Power supply	100/110/220 ±10% Vac at 50/60 Hz
HPS 3000 Power requirement	200 VA
HPS 3000 Ambient Operating Temperature	32° to 120°F (0° to 50°C)
Ambient operating temperature (Probe Junction Box)	300°F (150°C) max
Approximate shipping weights:
18 inch (457 mm) package	55 pounds (24.97 kg)
3 foot (0.91 m) package	60 pounds (27.24 kg)
6 foot (1.83 m) package	65 pounds (29.51 kg)
9 foot (2.74 m) package	72 pounds (32.66 kg)
12 foot (3.66 m) package	78 pounds (35.38 kg)

1All static performance characteristics are with operating variables constant.

2Equipment ordered utilizing this document as reference will be supplied to the USA standard design. Custom- ers requiring the EEC standard design should request the EEC documentation and utilize its ordering data. Temperatures over 1000°F (537°C) may affect the ease of field cell replaceability.

A-2 Appendices Rosemount Analytical Inc. A Division of Emerson Process Management